Quality Automotive Plastic Primer Plastic Primer -A200 factory direct high adhesion properties of one-component plastic primer A200, air-drying, suitable for most of the plastic parts, provides good adhesion ability to enhance the film with transparent plastic substrate adhesion primer applied between the substrate PP, PA, PVC and other plastic substrates for a variety of plastic materials can be sprayed surface, do not apply to solvent sensitive substrates treated with P600 sand bottom end polished, Among other impurities with the mixing ratio of oil to remove wax, grease, etc. requires no mixing, the direct use of available time-use spray viscosity of 16-18 sec / 20 ℃ when the applied coating layer 2 layer flash dry for 3-5 minutes each time a thickness of about 10 pressure spray gun gravity type micron diameter 1.3-1.5 /3-3.5kg/ suction 1.5 caliber guns /3.5-4kg 5-10 minutes after the remarks construction must not dry before spraying the primer or topcoat without sanding sanding sandpaper recommended shelf life of the original cover two years (can continue to use after passing inspection) Packing 1L × 12 cans